Luthermusic

PRESONUS MONITOR STATION

RSP: S$540.00

Now: S$450.00

This area is where you may put in yourpwn header.

The Monitor Station is the ultimate desktop monitoring and communications system for your recording studio. Based on the award-winning Central Station, the Monitor Station provides talkback, speaker switching, input source switching and four ultra loud and clear headphone amplifiers delivering everything you need to control your recording environment.

Input Switching

The Monitor Station allows you connect up to three input audio streams (TRS1, TRS2, Aux/Phono) allowing you to switch between and compare different inputs. One application is used to connect your computer recording system main outputs to the TRS 1 inputs and a CD player's outputs to the Aux inputs on the Monitor Station to compare your mix with a commercial CD with the touch of a button.

Speaker Switching

Three sets of speaker outputs are loaded on the Monitor Station allowing you to audition your mix on different speakers to take the guessing out of how your mixes will translate in the real world.

Main and Cue Routing

The Monitor Station allows each of the stereo inputs (TRS1, TRS2, aux) to be routed to one of two audio paths, "main" and "cue". The Monitor Station allows you to route two separate signals (Main and Cue) to each of the four headphone amplifiers.Send a mix with click track to TRS 2 input while sending the "main mix" to TRS 1. You can then enable the headphone amplifiers to listen to either cue or main mix. The main audio path always feeds what you will hear in the control room.

Total Communication

Communication during recording is essential. No more yelling when you need to talk to the musicians wearng headphones. Use the Monitor Station talkback system with on boad or external microphone to communicate with the musicians.

Specifications

Audio Inputs
Talkback Microphone
	Gain Range	+15 to +55 dB
Internal Microphone	Type	electric condensor
	Sensitivity	-42 dB
External Input	Type	XLR Female Balanced
	Input Impedance (Balanced)	1200 Ω
	Maximum Gain	50 dB
	Maximum Input Level	-10 dBu
	Frequency Response	10 Hz to 40 kHz, ±1 dB
Stereo 1 and Stereo 2 Inputs
	Type	¼” TRS Active Balanced
	Input Impedance (Balanced)	10 kΩ
	S/N Ratio (1 kHz @ 0 dBu, Unity Gain)	>110 dB
	THD+N (unwtd, 1 kHz @ 0 dBu Output, Unity Gain)	<0.0075%
	Frequency Response (±0.5 dB)	10 Hz to 65 kHz
	Noise Floor (20 Hz to 20 kHz, 150 Ω input termination)	-96 dBu
	Maximum Input Level (Minimum Gain, 1 kHz @ 0.5% THD+N)	+22 dBu
Auxiliary Inputs
	Type	RCA Active Unbalanced
	Input Impedance	47 kΩ
	S/N Ratio (1 kHz @ 0 dBu, Unity Gain)	>115 dB
	THD+N (unwtd, 1 kHz @ 0 dBu Output, Unity Gain)	<0.01%
	Frequency Response (±0.5 dB)	10 Hz to 50 kHz
	Gain Range	-80 dB to +10 dB
	Phono Mode Gain	32 dB @ 1 kHz
	Phono Mode THD+N	<0.05%
	Phono Mode Noise Floor (40 dB gain, inputs shorted)	-72 dBu
Input Meters (ST1, ST2 & Aux only)
	Type	Dual 8-segment LED w/ peak hold
	Sensitivity Range	-24 dB to 0 dB

Audio Outputs
	Type	¼” TRS Active Balanced
	Output Impedance (Balanced)	51 Ω
	THD+N (unwtd, 1 kHz @ 0 dBu, Unity Gain)	<0.003%
	Frequency Response (±0.5 dB)	10 Hz to 50 kHz
Speaker A, B and C	Trim Range	¼" TRS Active Stereo
	Main Level Range	-80 dB to 0 dB
	Dim Attenuation Range	-80 dB to 0 dB
Cue	Main Level Range	-80 dB to 0 dB
	Dim Attenuation (Talkback activated)	-20 dB
Headphones	Type	¼” TRS Active Stereo
	Maximum Output (60 Ω load)	150 mW / channel
	Frequency Response (±1.0 dB)	10 Hz to 50 kHz

Power
	Power Supply Type	External AC Transformer / Internal Line (factory configured)
	Input Connector Type	Barrel, 5.5 mm outside diameter, 2.1 mm inside diameter
	Monitor Station Input Voltage Range	16 VAC
	Power Requirements (Continuous)	10W

Physical
Main Chassis
	Dimensions	9.5(W) X 3(H) X 8.75(D) inches
	Weight	10lbs