Luthermusic

AUDIO TECHNICA AT2035

RSP: S$278.00

Now: S$218.00

This area is where you may put in yourpwn header.

Designed for critical home/project/professional studio applications and live performance, the AT2035 delivers exceptional detail and low noise. With its extended low-frequency response, the AT2035 provides rich, full sound reproduction and handles extremely high sound pressure levels with ease.

Large diaphragm for smooth, natural sound and low noise

High SPL-handling, wide dynamic range
80 Hz high-pass filter and 10 dB pad
Cardioid polar pattern reduces pickup from sides/rear

[includes professional shock mount ]

Specifications

Element	Fixed-charge back plate, permanently polarized condenser
Polar Pattern	Cardioid
Frequency Response	20-20,000 Hz
Low Frequency Roll-off	80 Hz, 12 dB/octave
Open Circuit Sensitivity	–32 dB (25.1 mV) re 1V at 1 Pa
Impedance	120 ohms
Maximum Input Sound Level	148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal)
Noise	12 dB SPL
Dynamic Range (Typical)	136 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio	82 dB, 1 kHz at 1 Pa
Phantom Power Requirements	11-52V DC, 3.8 mA typical
Switch(es)	Flat, roll-off; 10 dB pad (nominal)
Weight	403 g (14.2 oz)
Dimensions	170.0 mm (6.69") long, 52.0 mm (2.05") maximum body diameter
Output Connector	Integral 3-pin XLRM-type
Accessory Included	AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
Audio-Technica Case Style	R5