ACOUSTIC TREATMENT
AUDIO INTERFACES USB / FW
D.I. BOXES
EQ, COMP, FX, PREAMPS
HEADPHONES
MIC & SPEAKER STANDS
MICS: CONDENSERS
   MICS: INSTRUMENT
AKG C 1000s
AKG C430
AKG D112
AKG D40
AKG D770
AKG Perception 170
Audio Technica AE-5100
Audio Technica ATM250DE
Audio Technica PRO37
AUDIX D2
AUDIX D6
AUDIX DP5-A Drum Mic Kit
AUDIX DP7-A Drum Mic Kit
AUDIX FP5 Drum Mic Kit
AUDIX FP7 Drum Mic Kit
AUDIX i5
RODE M3
RODE NT3
RODE NT5
SENNHEISER E604
SENNHEISER E609
Sennheiser E614
SENNHEISER E902 KICK MIC
SENNHEISER E914 CONDENSER
SHURE Beta 52 Kick Drum Mic
SHURE Beta 57
SHURE Beta 91
SHURE PG81
SHURE SM57
SHURE SM81
YAMAHA Subkick SKRM-100SFV
MICS: VOCAL
MICS: WIRELESS HANDHELD
MICS: WIRELESS OTHERS
MIXERS: ANALOG
MIXERS: DIGITAL
MIXERS: POWERED
MUSIC STANDS
PORTABLE PA
PORTABLE SD RECORDERS
POWER AMPS
PRO AUDIO COURSES
RACKS & CASES
SPEAKERS: ACTIVE
SPEAKERS: PASSIVE [PAIR]
STUDIO MONITORS [PAIR]
 


 
MICS: INSTRUMENT

Audio Technica AE-5100

RSP: S$468.00

Now: S$390.00

 

This area is where you may put in yourpwn header.

The Artist Elite AE5100 large diaphragm cardioid condenser instrument microphone provides uncompromising sound quality for overheads, percussion, acoustic guitar, strings and other acoustic instruments. With rich, warm, accurate sound, the AE5100 also incorporates the most essential ingredients for quality live sound in a choir microphone. Its large-diaphragm capsule delivers accurate, natural response, while its low-profile design permits innovative placement options. With a lower profile than the large studio microphones to which it compares sonically, the AE5100 offers an outstanding performance-to-size ratio. With its low noise and smooth response, the AE5100 is ideal for recording, too.

  • Large-diaphragm capsule delivers accurate and natural response

  • Low-profile design permits innovative placement options previously unattainable with a large-diaphragm condenser

  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source

  • Robust design for enduring dependability on the road

  • Includes isolation clamp for shock protection, secure mounting and easy positioning

  • Integral 80 Hz HPF switch and 10 dB pad

Specifications
  • Element: Fixed-charge back plate, permanently polarized condenser

  • Polar Pattern: Cardioid

  • Frequency Response: 20-20,000 Hz

  • Low Frequency Roll Off: 80 Hz, 12 dB/octave

  • Open Circuit Sensitivity: -36 dB (15.8 mV) re 1V at 1 Pa

  • Impedance: 150 ohms

  • Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL with 10 dB pad (nominal)

  • Dynamic Range: 137 dB, 1 kHz at Max SPL

  • Signal to Noise Ratio: 83 dB, 1 kHz at 1 Pa

  • Phantom Power Requiremens: 11-52V DC, 3.2 mA typical

  • Weight: 5.0 oz (143 g)

  • Dimensions: 5.85" (148.5 mm) long, 1.02" (26.0 mm) maximum diameter

  • Output Connector: Integral 3-pin XLRM-type

  • Accessories: AT8471 isolation clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; AT8136 windscreen; soft protective pouch