ACOUSTIC TREATMENT
AUDIO INTERFACES USB / FW
D.I. BOXES
EQ, COMP, FX, PREAMPS
HEADPHONES
MIC & SPEAKER STANDS
MICS: CONDENSERS
MICS: INSTRUMENT
MICS: VOCAL
MICS: WIRELESS HANDHELD
MICS: WIRELESS OTHERS
MIXERS: ANALOG
MIXERS: DIGITAL
MIXERS: POWERED
MUSIC STANDS
   PORTABLE PA
JBL EON 210
SAMSON XP150 - New!
YAMAHA STAGEPAS 150-M
YAMAHA STAGEPAS 250M
YAMAHA STAGEPAS 300
YAMAHA STAGEPAS 500
PORTABLE SD RECORDERS
POWER AMPS
PRO AUDIO COURSES
RACKS & CASES
SPEAKERS: ACTIVE
SPEAKERS: PASSIVE [PAIR]
STUDIO MONITORS [PAIR]
 


 
PORTABLE PA

JBL EON 210

RSP: S$1990.00

Now: S$1750.00

 

This area is where you may put in yourpwn header.

The EON210P consists of two 10-inch, two-way, powered loudspeakers, one with a detachable powered mixer and the other with a detachable storage compartment, one pair of unshielded speaker cables and a power cord. Capable of reproducing full bandwidth sound at high levels the 210P is comprised of a 250 mm (10 in) woofer, a 37.5 mm (1.5 in) neodymium high frequency compression driver coupled to a 100° H by 60° V waveguide driven by a 300 watt Crown® Class-D power amplifier and integrated mixer.

Specifications

 

System Power Rating

  :  

300 Watts (2 X 150 Stereo)

Maximum SPL Output

  :  

124 dB peak system
output (pink noise)

Net Weight of System

  :  

33 lbs. (19 lbs. for unit
with powered mixer,
14 lbs. for unit with
storage pod)

System Type

  :  

Powered mixer with 2 two-way bass-reflex enclosures

Frequency Range (-10 dB)

  :  

60 Hz - 20 kHz

Frequency Response (±3 dB)

  :  

75 Hz - 19 kHz

AC input

  :  

120 - 240 V 50/60 Hz, voltage selector switch sets operational range

Amplifier Design

  :  

Crown® Class D

Output Connector

  :  

2 X 1/4” TS (unbalanced) amplifier outputs

Input Connectors

  :  

8 inputs (4 Mono Mic/Line, 2 X Stereo)

Channels

  :  

1-4 are XLR / 1/4” jack combo connectors, XLR is a mic level input, 1/4” is a line level input. 5-6, one pair of 1/4” balanced TRS jacks (stereo), and a pair of RCA jacks (stereo). 7-8 is a 3.5 mm stereo jack

Input Impedance

  :  

Ch 1-4 Combo: XLR 3 K Ohms Balanced
Ch 1-4 Combo: TRS 20 K Ohms Balanced
Ch 5-6: TRS 25 K Ohms Balanced
Ch 5-6: RCA 12 K Ohms Unbalanced
Ch 7-8: 3.5 mm 30 K Ohms Unbalanced

Phantom Power

  :  

30 V

Output Connectors

  :  

Monitor outputs: one pair of 1/4” balanced TRS jacks (stereo), and a pair of RCA jacks (stereo)
Headphone output: one 3.5 mm stereo jack

Signal Indicators
Main Output LED Ladder

  :  

Limit: Red LED indicates limiter active condition
Signal: Green LED indicates signal present

Signal Indicators: Ch 1-4

  :  

Peak LED: Green = signal present, Red = input overload

EQ

  :  

Individual channel Bass and Treble controls, center detent, +/-6 dB cut and boost

System Limiter

  :  

On Board DSP Limiting and Tuning

LF Driver

  :  

1 x JBL 328 H 250 mm (10 in) woofer

HF Driver

  :  

1 x JBL 2414H-1 37.5 mm (1.5” ) annular polymer diaphragm, neodymium
compression driver

Coverage Pattern

  :  

100º x 60º nominal

Crossover Frequency

  :  

2 kHz

Crossover Type

  :  

Passive network, 2nd order filters (-12 dB per octave) for high pass and low pass filters

Enclosure

  :  

Polypropylene

Suspension/ Mounting

  :  

36 mm pole socket with stabilizing screw

Handles

  :  

One on top

Grille

  :  

Powder coated perforated steel

Shipping Package (HxWxD)

  :  

21.5” x 26” x 13.75”
(546 mm x 660 mm x 349 mm)