ADAM A5
ADAM A7
KRK ROCKIT RP5
KRK ROKIT 6
KRK VXT6
MACKIE HR624 Mk 2
MACKIE MR-5
YAMAHA HS50/80
YAMAHA MS-P7










 



KRK VXT6

At KRK, our focus has always been to make the most accurate studio monitors available at any price. So when you use a VXT powered monitor, you can be confident that you get the most accurate reproduction of your mix. VXT’s diffraction-limiting curved surfaces, silk-domed tweeter, seamless crossover, and KRK’s trademark yellow Kevlar woofer bring superior audio imaging, outstanding transient response, and amazing detail. For over 20 years, KRK has mastered the art of recording monitors, and the VXT is the culmination of this art. Listen for yourself, and believe!

Radical curves for better imaging. The molded shape of the VXT allows for radically curved surfaces that sound better. Traditional rectangular speakers suffer from diffraction as sounds leaving the edge of the cabinet are reflected back into the sound field causing phase distortion. The VXT virtually eliminates diffraction and delivers excellent imaging characteristics and a much wider sweet spot. There are no discontinuous elements to create diffraction.

Ports Where They Belong. Take a look at competitive monitors and you'll find ports on the back of the cabinet. These rear-firing ports tend to create bass coupling with walls and corners amplifying low frequency information which will color your mix. The superior design of the KRK VXT include front-firing ports, which are just the right shape to reduce port turbulence. You'll appreciate the clean and accurate bass performance this approach delivers, even at high SPLs.

The VXT uses high-tech ABS Structural Foam in its cabinet. This material is very rugged and extremely impact resistant, and makes it possible for KRK engineers to create a speaker with no internal parallel walls, thereby preventing sound-coloring internal nodes. This material also has far better damping characteristics than traditional speaker materials which eliminates coloration caused by cabinet resonance.

Revolutionary materials, Revolutionary Sound The new, stiffer, lighter woofer cone has an extruded aluminum pole piece and vented formers. This improves transient response, reduces distortion and extends low-frequency response due to this lighter, stiffer cone. The aluminum pole piece and venter formers eliminate overheating which improves performance.

Catch A Wave, For A 3D Mix Our recessed silk-domed tweeters provide amazing high-end detail. Our careful design of dome and waveguide geometry coupled to the curved front baffle are optimized for on and off-axis linearity resulting in excellent imaging and a wider sweet spot.

 

Drivers: Woofer: 6" Woven Kevlar
Tweeter: 1" Silk Dome Ferrite
Input: XLR-1/4" TRS Combo
10k Ohm Blanced
Pin 1 + Sleeve = Ground
Pin 2 + Tip = (+) High
Pin 3 + Ring = (-) Low
Amp & Fusing: HF: 30 Watts
LF: 60 Watts
3.15A 100VAC 50Hz
3.15A 110-120VAC 50/60Hz
1.60A 220-240VAC 50/60Hz
Frequency Response: 49Hz - 22kHz +/-1.5dB
Dimensions:(H x W x D) 14 1/2" H x 10 1/3" W x 9 5/8" D
36.8cm H x 26.3cm W x 24.6cm D
Weight: 25.6 lbs (11.6 kg)

 

REVIEW FROM REMIX MAG:

Busy producers and engineers know that the monitors you choose for audio work can have a profound impact on the quality of both your final product and your work experience. Without precise monitoring, there is no way of accurately telling what's really going on inside your mixes. For engineers and producers who hear the same sounds over and over again, listenable monitoring is truly the only way to survive the experience with any sanity; many producers even carry their favorite monitors with them from studio to studio. I wasn't sure what to expect from KRK's new series, but I am ultimately very pleased at how the VXT6 speaker pair treated my ears. While they are surprisingly heavy and look almost like someone inflated square monitors with a bike pump, KRK's new design is undeniably successful at delivering impressive clarity of stereo field, as well as noticeably even and defined frequency response, even down in the lower end. They captured me right away with crispness across the spectrum and clear imaging.

GET YOUR CURVE ON

The VXT series is definitely a descendent of KRK's popular Expose line; the relationship is clear, but the concept has been refined. Edges are curved, the sides are smoother and the entire faceplate is gently curved with no sharp lines or mirrored walls. The insides are filled with ABS structural foam for careful resonance control, and the lower transmitted noise means the outer shell can be thinner. This altered balance in body makeup definitely shows in the sound, reducing the internal standing waves and thus massively reducing internal distortion, allowing the system to operate at higher internal volume and thereby enhancing the low-end response. I personally noted that this design also provides less side noise and rear noise than other monitors I've used, and there is no doubt that the low end is deep yet clear.

KRK also redesigned the tweeter and woofer for more accuracy and better transient response. A custom-woven Kevlar woofer was designed for each of the VXT sizes (VXT4 and VXT8 for $399 and $799 each, respectively) to minimize axial breakup and extend the low-end range, and the tweeters are made of 100-percent pure silk that KRK claims provides the tightest transient response. I can't argue with the results. The imaging within the stereo field is crisp but never sonically unsettling, and the system reacts just as smoothly and evenly with sharp, uncompressed drum hits and pumping full mixes as it does with gentle, carefully recorded acoustic sounds. Warm analog tones and harsh digital sounds all come through sounding clear, even and realistic. One of the selling points of the VXT series is a wider sweet spot, and on this, the VXT6s definitely deliver. While mixing, I switched to the “secondary” chair and was pleasantly surprised how clearly I could still make out the stereo field. There was nearly no loss of high-end clarity or serious stereo-field distortion for a good 18 to 24 inches on either side of the center — impressive indeed.

IT'S THE LITTLE THINGS

Great sound aside, the VXT6s carry a bunch of smaller features that add flexibility, security and peace of mind. Omni Mount support means flexible placement options, and the -30 to +6 dB knob allows usage with a wide range of sources and in rooms of varying sizes. Five rocker switches include HF Adjust for setting the high end up or down by 1 dB; LF Adjust, which offers three slightly varied low-end curves for dialing in the room's response to the extended low frequencies; a ground lift switch; Auto-Mute, which will shut the power supply off after 20 minutes without a signal; and a switch to enable/disable an LED clipping light or an output limiter. The limiter isn't too useful during mixing, so it's nice that you can turn it off. However, it can be useful when tracking so that an unexpected volume surge won't harm the speaker.

The clip light is a nice touch, appearing underneath the logo on the front (although I think the glowing KRK logo itself is an eyesore). All five switches are covered with a plastic guard that I initially found annoying because I couldn't move the switches with my finger and was forced to improvise with a pen cap. However, as I more regularly switched the power on and off, I discovered that those were a perfect design element; without them, I would have accidentally changed settings numerous times when fumbling around the back for the power switch. Small details like that that really sold me on the VXT6s. Great sound plus several subtle and creative changes to the normal monitor paradigm add up to a noticeably nicer working experience

 

RSP: S$1500 per pair

Now: S$1390 per pair



MAINTENANCE

Click here to Ray's guitar care page if you require any maintenance service for your guitar.
 
     

Copyright © 2009 Luthermusic · All Rights Reserved ·