
















|
|
|


PRESONUS Firestudio Mobile
Finally,
a new-generation, studio-quality FireWire interface that you can use
anywhere! The PreSonus FireStudio™ Mobile combines the superior
analog-circuit design and advanced platform technology of our acclaimed
FireStudio rack-mount interfaces with the ability to run on bus power
in field applications. Now you can have enhanced audio performance for
music recording and creation anywhere you can lug your laptop!
The Most Inputs of Any Mobile Interface
The FireStudio Mobile is a ten-input, six-output professional recording
system that combines two PreSonus XMAX™ Class A microphone
preamplifiers; six line-level, analog input channels; S/PDIF digital
input and output; MIDI I/O; and headphone monitoring with separate gain
control. The FireStudio Mobile beats any and all competition when it
comes to flexibility and input count. You can record a whole band with
the FireStudio Mobile.
The FireStudio Mobile is bundled with PreSonus
Studio One Artist, our groundbreaking music creation program, and over
4 GB of virtual instruments, plug-ins, loops, and samples to get you
started making music immediately.
True 48-Volt Phantom Power – Even When Powered By Your Laptop!
Here’s a dirty little secret: bus-powered mobile interfaces from other
manufacturers deliver much less than the full 48 volts of phantom power
that is specified by microphone manufacturers. This means even the
finest condenser microphone can’t work at optimal internal gain levels,
potentially compromising sound quality even before the signal gets to
the mic preamp!
PreSonus president Jim Odom and his team of engineers
went the extra mile and created an “internal switching power plant”
that lets the FireStudio Mobile convert computer bus power into a full
48 volts of phantom power, as well delivering 30 volts to power the
superb mic preamps you’ll read about next.
XMAX™ Class A Preamplifiers to Go At
PreSonus, we know that the mic preamplifier is a key component in the
sonic quality of a recording. Many other companies that offer mobile
recording interfaces add the cheapest possible microphone preamplifier
as an afterthought. In contrast, the FireStudio Mobile includes
custom-designed, high-voltage, discrete, XMAX Class A microphone
preamplifiers that are suitable for use with all types of microphones.
The
job of a microphone preamplifier in an audio interface is to boost a
microphone-level signal to line level before conversion to the digital
domain. A good preamp boosts the level to almost 400 times that of the
original signal, making the preamp one of the most important stages in
an interface. A cheap, off-the-shelf, op-amp-type mic preamp delivers
thin, noisy, harsh results. But with XMAX preamps, the sonic quality is
limited only by what microphone you plug into it.
XMAX preamplifiers are built with three key elements:
- High
Voltage. The XMAX preamplifier runs on power rails of 30V. Most
off-the-shelf, op-amp-based designs run on power rails of 10V to 18V.
Higher-voltage power rails deliver more headroom, deeper lows, smoother
highs, and a richer overall sound.
- Discrete components—not
op-amps. We only use genuine transistors, resistors, and capacitors.
Op-amps add noise, coloration, and harshness to a signal. Our discrete
design delivers ultra-low noise and transparency.
- Class A.
Class A circuits have no crossover distortion and deliver purer,
clearer, and more musical results than the Class AB designs that are
found in many preamps.
The net result of the XMAX preamp
design is high headroom, low noise, wide dynamic range, extended
frequency response, and—most important—musicality and transparency,
with smooth highs, solid deep lows, and everything in between.
On the Front
A pair of 3-LED level/clip indicators let you check the signal levels
for channels 1 and 2, and a button enables 48V phantom power for the
two mic channels. Also on the front panel are gain knobs for the two
mic/instrument inputs and for the main stereo outputs and a stereo
headphone output with gain knob. Gain for the mic inputs ranges from
–10 dB to +70 dB; the high-impedance instrument inputs range from –30
dB to +50 dB of gain. Finally, a power/sync indicator LED shows whether
the FireStudio Mobile is receiving adequate power and is correctly
receiving word clock.
Ins and Outs For a compact,
portable unit, the FireStudio Mobile is loaded with I/O. We start with
a pair of combination XLR/TS mic/instrument jacks, which are in the
inputs for channels 1 and 2. The XLR mic inputs are routed to the
aforementioned XMAX solid-state mic preamplifiers. The high-impedance,
TS instrument inputs let you plug guitars or basses directly into the
front panel.
On the back are 6 more balanced, ¼-inch line level
inputs for channels 3 through 8, plus a DB9 connector that accepts a
breakout cable (included) to provide stereo S/PDIF digital I/O and MIDI
I/O. You get two FireWire 400 ports: one port connects to your
computer, and the other can be used to connect a hard drive or to
daisy-chain any FireStudio-family interface, including the StudioLive
16.4.2 digital mixer, allowing you to integrate the FireStudio Mobile
into a larger system.
Digital Converters and JetPLL Sync FireStudio Mobile’s A/D/A converters have a dynamic range of 118 dB for unbelievable clarity.
Synchronization
to your computer is stable and robust, thanks to JetPLL™
synchronization technology. JetPLL incorporates noise shaping to
virtually remove all audio-band jitter, ensuring near-perfect clock
performance and optimal converter performance when networking two or
more digital-audio devices. JetPLL quickly locks to any digital format
through a wide range of frequencies and is extremely robust and
tolerant of wide variations in clock frequencies. As a result, you’ll
experience better stereo separation and clearer, more transparent audio.
Universal Control Like
all members of the PreSonus FireStudio family (including the StudioLive
16.4.2 mixer), the FireStudio Mobile comes bundled with Universal
Control software. Universal Control is a powerful, flexible, and
easy-to-use control-panel application that allows you to daisy-chain to
up to four FireStudio family devices for a maximum of up to 52 inputs
and outputs (assuming your computer can handle that many tracks).
Universal
Control consists of the Launch window and the Device window. In the
Launch window, you can set the sample rate, clock source, safe mode,
buffer size (PC only), and WDM routing (PC only) for all connected
FireStudio Mobile-series interfaces. Each device is listed at the
bottom of the window, along with Device Window buttons that open each
interface’s Device window.
The Device window provides level and
routing controls for each FireStudio-series interface’s internal mixer,
enabling you to set up zero-latency cue mixes. Input and output
metering have been optimized for ultra-fast screen display and minimum
CPU usage, and you can give each interface a custom name. You can use
any device in the chain as the master clock source, or you can slave
the entire chain to an external digital device using any of the
available digital inputs in the chain.
Studio One Artist—Plus Gigabytes of Creative Resources The
FireStudio Mobile is bundled with an exceptional software package,
featuring PreSonus Studio One Artist, the amazing new DAW software for
Mac OS X and Windows XP and Vista that makes producing high-quality
projects easier than ever before. As part of the Studio One Artist
package, you get 20 new PreSonus Native Effects plug-ins and virtual
instruments and a generous bundle of third-party loops, software, and
instrument sounds.
Compare Studio One Artist and bundled extras to what comes with competing mobile interfaces:
- All-meat, no-bloat, music-creation software with an intuitive, practical, single-window interface
- Unlimited tracks, insert effects, sends, virtual instruments, buses, and effects channels
- Powerful drag-and-drop functionality
- Content browser with convenient sort options and preview player
- Full-featured, flexible automation
- Powerful real-time auto/manual time-stretching and resampling engine
- Control Link™ (advanced MIDI mapping made easy)
- Twenty 32-bit Native Sound™ plug-ins, including reverbs, amp modeling, and EQ
- Four new virtual instruments, including a sampler and an analog-type subtractive synth
- Ability to control FireStudio Mobile’s software mixer to create zero-latency cue mixes.
- Gigabytes
of third-party resources, including Native Instruments™ Kore™ Player
with custom SoundPack (150 instruments), Native Instruments™ Guitar Rig
LE, Toontrack™ EZDrummer Lite, and over 1.4 GB of loops!
See It. Buy It. Take it Anywhere.
- The first mobile interface with PreSonus’ renowned studio-interface audio quality
- Plug-and-play, high-speed FireWire 400 (IEEE 1394)
- 24-bit resolution with 44.1, 48, 88.2, 96 kHz sampling rates
- Record/playback 10 inputs and 6 outputs
- 2 XMAX™ PreSonus microphone/instrument preamplifiers with true 48V phantom power for condenser mics
- 8 line inputs, 2 line outputs
- Stereo S/PDIF and MIDI input/output — DB9 break-out cable included
- Zero-latency monitoring
- Headphone output with gain control
- Software router/mixer
- Powered via FireWire bus or using included power supply
- Windows- (32- and 64-bit) and Macintosh-compatible
- Universal Control control-panel software
- DICE II Chipset - extremely efficient data transfer
- JetPLL™ – jitter-elimination technology
- Road-rugged construction
- Shockproof, reinforced metal chassis
- Silky-smooth, sealed rotary controls
- Military-grade circuit board
- Chassis-mounted input/output sockets resist strain from jacks
- Full shielding from external interference
- Daisy-chainable with the PreSonus FireStudio family of products
Full version of Studio One Artist multitrack-recording software included; easy integration — no setup or configuration
Retail: S$499 Now: S$425
call us 65694919 to check stocks as this item is HOT!
- The first mobile interface with PreSonus’ renowned studio-interface audio quality
- Plug-and-play, high-speed FireWire 400 (IEEE 1394)
- 24-bit resolution with 44.1, 48, 88.2, 96 kHz sampling rates
- Record/playback 10 inputs and 6 outputs
- 2 XMAX™ PreSonus microphone/instrument preamplifiers with true 48V phantom power for condenser mics
- 8 line inputs, 2 line outputs
- Stereo S/PDIF and MIDI input/output — DB9 break-out cable included
- Zero-latency monitoring
- Headphone output with gain control
- Software router/mixer
- Powered via FireWire bus or using included power supply
- Windows- (32- and 64-bit) and Macintosh-compatible
- Universal Control control-panel software
- DICE II Chipset - extremely efficient data transfer
- JetPLL™ – jitter-elimination technology
- Road-rugged construction
- Shockproof, reinforced metal chassis
- Silky-smooth, sealed rotary controls
- Military-grade circuit board
- Chassis-mounted input/output sockets resist strain from jacks
- Full shielding from external interference
- Daisy-chainable with the PreSonus FireStudio family of products
Full version of Studio One Artist multitrack-recording software included; easy integration — no setup or configuration
Computer system requirements:
Below are the minimum computer-system requirements for your FireStudio Mobile.
Windows
- Windows XP SP2 (32- or 64-bit) or later or Vista (32- or 64-bit; 64-bit requires driver version 3.4.1 or later)
- Intel Pentium 4 1.6 GHz processor or AMD Athlon 64 (Turion) (2.5 GHz or faster recommended)
- 1 GB RAM (2 GB or more recommended)
Macintosh
- Mac OS X 10.4.11 or Mac OS X 10.5.2 or later (10.6 supported in driver version 3.4.2)
- PowerPC G4 1.25 GHz or Intel Core Solo 1.5 GHz processor (2 GHz or faster recommended)
- 1 GB RAM (2 GB or more recommended)
Windows and Macintosh Systems
- IEEE 1394 FireWire 400 Port
- Internet connection recommended
- DVD-ROM drive
- Internal or external 7200 RPM storage drive highly recommended
Note
that the speed of your processor, amount of RAM and size and speed of
your hard drive will greatly affect the overall performance of your
recording system. Also, a more powerful system (faster processor with
more RAM) will allow for lower latency (signal delay) that you might
experience while monitoring audio or MIDI signals.
Monitor resolution for both PC and Macintosh should be no lower than 1024x768 pixels.
Known compatible and incompatible hardware
| Microphone Preamp (XLR Balanced) |
| |
Frequency Response (+0, -0.5 dB) |
20 Hz to 50 kHz |
| |
Frequency Response (+0/-3.0 dB) |
20 Hz to 150 kHz |
| |
Input Impedance |
1.6 kΩ |
| |
THD + N (unwtd, 1 kHz @ +4 dBu Output, Unity Gain) |
< 0.008 % |
| |
EIN (unwtd, 55 dB Gain, 150Ω Input, 20 Hz to 22 kHz) |
–130 dBu |
| |
S/N Ratio
(Unity Gain, unwtd, Ref = +4 dBu, 20 Hz to 22 kHz) |
>101 dB |
| |
Common Mode Rejection Ratio (1 kHz, 55 dB Gain) |
>55 dB |
| |
Gain Control Range (± 1 dB) |
–10 dB to 70 dB |
| |
Maximum Input level (Unity Gain, 1 kHz@0.5% THD+N) |
+14 dBu |
| |
Phantom Power (± 2 VDC) |
+48 VDC |
|
|
| Instrument Input (¼" TRS, Channels 1 & 2) |
| |
Type |
TS Female Unbalanced |
| |
Input Impedance |
1 MΩ |
|
|
| Main Outputs |
| |
Type |
¼" TRS Impedance Balanced |
| |
Output Impedance |
51Ω |
| |
Headphone Output |
|
| |
Type |
¼" TRS Active Stereo |
| |
Maximum Output |
150 mW/CH @ 60Ω Load |
| |
Frequency Response |
10 Hz - 70 kHz |
|
|
| Digital Audio |
| |
FireWire (IEEE 1394) Speed |
400 Mbps |
| |
ADC Dynamic Range (A-wtd, 48 kHz) |
118 dB |
| |
DAC Dynamic Range (A-wtd, 48 kHz) |
118 dB |
| |
Bit Depth |
24 bits |
| |
Reference Level for 0 dBFS |
+10 dBu |
| |
Internal Sample Frequency Selections |
44.1, 48, 88.2, 96 kHz |
|
|
| Clock |
| |
Jitter |
<20 ps RMS (20 Hz – 20 kHz) |
| |
Jitter Attenuation |
>60 dB (1 ns in => 1 ps out) |
|
|
| Power |
| |
Bus Power |
6-pin FireWire 400 or FireWire 800 |
| |
Power Supply |
External Switching Supply (12 VDC/1A) |
|
|
| Physical |
| |
Dimensions (WxHxD) |
5.5" x 1.75" x 5.5"/139.7 mm x 44.5 mm x 139.7 mm |
| |
Weight |
4.5 lbs/2 kg |
| As
a commitment to constant improvement, PreSonus Audio Electronics, Inc.
reserves the right to change any specification stated herein at any
time in the future without notification. |
- Windows XP (32-bit & 64-bit), Vista (32-bit & 64-bit) Universal installer for FireStudio famliy and StudioLive
(Driver, Universal Control, and firmware update)
download
(v
3.4.1 - Requires firmware update. Features: 64-bit compatibility,
multi-unit support, Universal Control compatible, optimized metering,
new post fader meter mode, user-definable buffer size, improved
performance and stability. view instructions)
- Mac OSX (10.4.11 - 10.5+) Universal installer for FireStudio famliy (and StudioLive)
(Driver, Universal Control, and firmware update)
download
(v
3.4.1 - Requires firmware update. Features: 64-bit compatibility,
multi-unit support, Universal Control compatible, optimized metering,
new post fader meter mode, improved performance and stability. view instructions)
- Mac OSX Snow Leopard 10.6 only Beta program for Snow Leopard Universal Control and Driver for FireStudio famliy (and StudioLive)
download
(v 3.4.2 - Mac OSX Snow Leopard 10.6 only view instructions)
- Windows 7 ONLY: Beta program for Universal Control and Driver for FireStudio famliy (and StudioLive)
download
(v 3.5 – Windows 7 ONLY view instructions view instructions)
|

MAINTENANCE
Click here to Ray's guitar care page if you require any maintenance service for your guitar. |
|
|
| |
|
|
|
|